4 way standard vehicle wiring
This would be the wire used to hard wire your vehicle as long as is has standard wiring.
4 way Wishbone Harnesses
These would be the harnesses used to rewire a standard trailer up to 30 feet. They are called wishbone harnesses because of the two brown (running) wires to go down each side of the trailer. We carry the harnesses in 15', 20', 25' and 30' harnesses.
5 way Wishbone Harness
This harness is for heavier boat trailers with hydraulic brakes. There are still two browns to have running lights down both sides of the trailer, but also a blue wire that connects with the back-up lights to let the trailer know to release the brakes so that the brakes unlock properly and smoothly.
7 way Blade Vehicle end
This is now the most common receptacle for factory prepped vehicles. There are many adapter to go down from this particular plug, making it quite universal.
7 way Blade Vehicle End
The 7 way plug on the trailer allows for a charge line, brakes and back up lights. These are standard on most tandem axle trailers.
7 way Round Pin Vehicle End
This plug is used for heavy duty towing most often and is usually installed on dump trucks, stake trucks and box vans.
7 way Round Pin Trailer End
This plug is used mostly on large trailers used for commercial purposes.
Excellent for replacing existing adjustable couplers and lunette rings when a standard ball is desired for towing instead of using a pintle hook.
For both Electric and Hydraulic brakes, the adjuster can be loosened or tightened depending on the specific need of the braking system
This popular item is used to add grease to hubs between repacking the bearings. The zirc fitting on the cap allows you to put in grease with a grease gun to freshen (not replace) the grease.
E Track Accessories
We offer a variety of accessories for mounting onto E-track. We have board brackets, straps, D-ring clips and covers to eliminate the sharp edges of the E-track.
Heavy Duty 2.5" Ball Mounts
We carry the Heavy Duty ball mounts that are needed to pull at the high capacity the 2.5" hitch is rated for.
We have all class hitch balls. We carry 1 7/8" balls, 2" balls, and 2 5/16" balls. We also carry bushings to
Hub Drums are made for trailers with brakes. The standard hub for #3500 axle is the 5 on 4 1/2" bolt pattern with a 10" diameter. We also have a 6 lug hub with the 10" diameter. For heavier duty trailers there are the 6 lug 12" hub and the 8 lug 12" hub.
Hydraulic Backing Plates
The standard 10" Hydraulic backing plate. This is the complete backing plate replacement. This is the part of the brake axle that fluid flows to, to actuate the wheel cylinder and the hydraulic brakes.
Hydraulic Free-Backing Plate
This type of Hydraulic Backing plate allows for the elimination of the use of the back up light to release the brakes. Free-backing plates are able to form this function on their own.
Hydraulic Brake Shoes
Brake shoes for replacement on standard Hydraulic Backing Plates.
Hydraulic Free-Backing Brake Shoes
As with the Free-backing plates, the shoes must be purchase according to what kind of brakes you have. You will need this particular brake shoe setup for your trailer to unlock as you desire to back up.
All different kinds of different plates and wheels to fit jacks of all different strengths and sizes.
Lunette rings are used to as couplers on a variety of heavy duty trailers. The lunette rings require a pintle hook to tow. There are bolt on, weld on and adjustable lunette rings with varying capacities.
We sell safety chain in 48" pre-cut lengths with clips on each end. We also sell a variety of chain by the foot so that you can chose your own length.